Version History
Here you can find the changelog of Rubetek Home since it was posted on our website on 2019-09-16.
The latest version is 2024.3.2 and it was updated on soft112.com on 27 April, 2024.
See below the changes in each version:
version 2024.3.2_H1
posted on 2024-04-18
В этом обновлении мы:
- Добавили возможность изменить номер телефона из настроек профиля.
- Для датчиков освещенности RL-3201 и RMS-3209 появились графики для отслеживания изменения показаний в течение дня
- Добавили функционал AI детекции для снижения количества ложных срабатываний для видеодомофонов RV-3440 и RV-3442
version 2024.3.1
posted on 2024-03-28
В этом обновлении мы:
- Добавили оповещение о возможности обновления камер,
- Улучшили внешний вид графиков ежедневных показаний температуры и влажности, а также сделали их интерактивными
- Исправили некорректное поведение камер при постановке дома на охрану
- Исправили неправильное отображение статусов датчиков RF 868 после добавления в дом
Мы продолжаем работать над улучшением нашего приложения.
Спасибо, что выбираете Rubetek!
version 2024.1.2
posted on 2024-02-13
В этом обновлении мы исправили:
- проблемы при создании сценариев с двухкнопочной панелью дистанционного управления RL-3122
- некорректную работу вызовов в режиме "Вибрация" и "Не беспокоить"
- проблему обновления Wi-Fi устройств
- некорректное отображение трансляции при выходе из архива записей
Кроме того мы повысили стабильность обнаружения RF устройств
Мы продолжаем работать над улучшением нашего приложения.
Спасибо, что выбираете Rubetek!
version 2024.2.1
posted on 2024-02-13
- Для видеодомофонов RV-3440 и RV-3442 стал доступен новый функционал обнаружения движения
- Добавили возможность группировки блоков управления с сухим контактом с другими устройствами
- Добавили возможность авторизации и регистрации с динамической почтой
- Исправили не правильное отображение статусов у Z-Wave датчиков
- Оптимизировали работу функционала "Автообновление устройств"
Мы продолжаем работать над улучшением нашего приложения.
Спасибо, что выбираете Rubetek!
version 2023.12.1_H6
posted on 2024-01-16
В этом обновлении:
- Исправили отсутствие звука во время звонка, при использовании Bluetooth гарнитуры.
- Упростили оформление подписки для домофонии, и добавили возможность подписаться на год
- Добавили отображение возможнных ошибок при входе по приглашению, если оно уже просроочено или принято другим.
Новый год все ближе и ближе! Чтобы поймать волну обновите приложение и потрясите телефон
Спасибо, что выбираете Rubetek!
version 2023.11.2
posted on 2023-12-21
В этом обновлении мы:
- Добавили возможность удалить фотографии из списка распознавания лиц, в том числе и при отсутствующей или просроченной подписке
- Адаптировали многие экраны для лучшего взаимодействия на планшетных устройствах и RCP-03
- Повысили стабильность подключения и соединения с камерами PRO
- Устранили проблему с нестабильным приходом вызова от домофона, при различии часовых поясов.
Мы продолжаем работать над улучшением нашего приложения.
Спасибо, что выбираете Rubetek!
version 2023.11.1_H2
posted on 2023-11-27
В этом обновлении мы:
- доработали отображение статусов устройств,
- исправили ошибку, возникающую при открытии электропривода,
- добавили раздел способов оплаты.
Мы продолжаем работать над улучшением нашего приложения.
Спасибо, что выбираете Rubetek!
version 2023.10.2_H2
posted on 2023-11-17
В этом обновлении мы:
- улучшили работу камер старого поколения,
- избавились от ложных уведомлений от домофонов,
- исправили ошибки в интерфейсе и приложении.
Мы продолжаем работать над недочетами благодаря вашим отзывам и становиться лучше вместе с вами.
Спасибо, что выбираете Rubetek!
version 2023.10.1
posted on 2023-10-16
В этом обновлении:
- обновили экран таймеров,
- добавили индикацию включения обогрева у бризера,
- улучшили добавление и отображение показаний датчика температуры и влажности,
- ускорили считывание QR-кодов приглашения.
Мы продолжаем работать над недочетами благодаря вашим отзывам и становиться лучше вместе с вами.
Спасибо, что выбираете Rubetek!
version 2023.9.2
posted on 2023-10-09
В этом обновлении:
- улучшили работу новой линейки видеозвонков,
- стали корректнее работать сценарии с датчиком протечки,
- внесли доработки для кастомизированных push-уведомлений.
- уменьшили количество неожиданных сбоев,
- исправили незначительные ошибки в интерфейсе.
Мы продолжаем работать над недочетами благодаря вашим отзывам и становиться лучше вместе с вами.
Спасибо, что выбираете Rubetek!
version 2023.9.1
posted on 2023-09-15
В этом обновлении мы:
- сделали приложение стабильнее и уменьшили количество неожиданных сбоев,
- переработали инструкции и изображения устройств,
- добавили возможность для Гостей+ добавлять, редактировать и удалять таймеры,
- исправили незначительные ошибки в интерфейсе.
Мы продолжаем работать над недочетами благодаря вашим отзывам и становиться лучше вместе с вами.
Спасибо, что выбираете Rubetek!
version 2023.8.2
posted on 2023-08-28
В этом обновлении мы:
- добавили подсказку о том, как меняется заряд батарейки при её замене;
- доработали инструкцию об удалении z-wave устройств;
- ускорили обновление статусов устройств и сценариев;
- исправили ошибки в интерфейсе и приложении.
Спасибо, что выбираете Rubetek!
version 2023.8.1
posted on 2023-08-28
В этом обновлении мы добавили важные функции для шарового крана RLP-3810:
- режим инверсии: позволяет изменить состояние крана с открытого на закрытое и наоборот
- ручная калибровка: с помощью этой функции можно отрегулировать крайние положения крана
- локальная поддержка беспроводных датчиков протечки RS-3225: повышает стабильность работы системы защиты от протечки.
Спасибо, что выбрали Rubetek!
version 2023.7.2
posted on 2023-08-11
В этом релизе усовершенствовали работу приглашений, добавили ряд визуальных улучшений и исправили ошибки.
Спасибо, что выбрали Rubetek!
version 2023.7.1
posted on 2023-07-18
В этом обновлении мы добавили возможность поставить оценку устройствам умного дома в разделе "Об устройстве". Ваше мнение о системе помогает нам делать ее лучше.
Также мы реализовали обновление ПО для датчиков серии Pro и добавили события о потере и восстановлении связи для устройств RE-3305, RE-3313, RE-3314, RE-3315. Теперь Вы всегда будете знать о выключении электричества и интернета в Вашем доме.
Спасибо, что выбрали Rubetek!
version 2023.6.2
posted on 2023-07-11
В этом обновлении мы расширили настройки RE-3315 в режиме «Роллер». Для общедомовых камер и домофонов реализовали режим трансляции «Картинка в картинке». А также добавили ряд визуальных улучшений и исправили ошибки
Спасибо, что выбрали Rubetek!
version 2023.6.1
posted on 2023-07-11
В этом релизе мы улучшили интерфейс разделов Скрытое, Избранное и Группы, чтобы повысить удобство их использования. Также теперь появилась возможность настраивать отложенный запуск для Ваших сценариев. Эта функция позволяет устанавливать время, через которое произойдет действие. Перед использованием необходимо убедиться в том, что устройства обновлены до последней версии.
Спасибо, что выбрали Rubetek!
version 2023.5.3
posted on 2023-06-26
В этом релизе мы обновили раздел настроек дома - он стал проще и удобнее для использования.
Улучшили авторизацию: теперь войти в приложение можно не только по номеру телефона, но и по e-mail.
А также внесли много визуальных и функциональных улучшений.
Спасибо, что выбрали Rubetek!
version 2023.5.1
posted on 2023-05-10
В этом релизе мы добавили защиту от случайного касания для плиток розеток, реле и лампочек.
Для двухканального реле RE-3315 в режиме Роллер теперь доступна инверсия направления движения. Она позволяет поменять местами позиции Открыто/Закрыто на шторке управления.
В разделе Видеонаблюдение появилось два режима отображения устройств - списком и плитками, что повышает удобство использования приложения при большом количестве камер и домофонов.
Спасибо что выбрали Rubetek!
version 2023.4.1
posted on 2023-04-25
В этом обновлении мы добавили:
- управление сессиями: можно увидеть на каких устройствах авторизовано приложение и выйти из него;
- возможность полной очистки истории событий.
Спасибо, что выбрали Rubetek!
version 2023.3.2
posted on 2023-03-27
В этом обновлении мы добавили:
- тактильный отклик при открытии дверей и смены статуса охраны дома;
- звук при просмотре видео с камеры домофона, если включен режим видео со звуком;
- визуальные улучшения и исправления ошибок.
Спасибо, что выбрали Rubetek!
version 2022.4.1
posted on 2022-04-28
Our team has fixed a number of issues in the mobile application for the comfortable operation of the home automation system.
Namely:
- fixed a number of errors when connecting and viewing cameras;
- the mechanism for updating the readings of the temperature and humidity sensor RC-3602 has been improved;
- added the "humidity" parameter when creating a script for the RC-3602 sensor;
- Optimized application performance.
If you encounter an error in the application, please contact us.
version 2022.3.3
posted on 2022-04-13
Thank you for choosing rubetek!
This update fixes:
- Application error when adding FaceID;
- Incorrect display of the two-channel block in scripts;
- The problem of connecting to broadcast cameras;
- Inability to select humidity when creating a scenario (for temperature and humidity sensors RC-3602/3605).
What's new:
- Support for light sensor RL-3201;
- Updated camera view screens;
version 2022.3.2
posted on 2022-03-30
This update adds a number of useful features:
- a picture from cameras in a push notification;
- automatic shutdown after a specified time for RE-3305, RE-3313, RE-3315;
- auto tracking for cameras RV-3421, RV-3423.
Thanks for your feedback! We have already fixed the incorrect temperature setting in the convector mode for the RM-3712 module.
Be sure to update the app. More fixes based on your feedback in the next release.
version 2022.2.1
posted on 2022-02-16
- Added support for the new dry contact relay of the PRO line
- Night mode for a new line of cameras
- Display of the main screens made a little faster
- Fixed indication of unread notifications inside the application
- Intercom RV-3430, when added to favorites, is now displayed in a separate section "Doors"
- Fixed a problem with displaying the list of scenarios in houses with a control center
- Fixed crashes on some phone models when working with camera video archive
version 2021.12.2
posted on 2022-01-24
- Add support for new cameras
version 2022.1.1
posted on 2022-01-24
Added:
- private mode and detection zones. Will allow lens control and motion detection in a specific area of the frame for a new line of cameras
- element management functionality. Allows you to reorder tiles and rooms
- support for new devices that will go on sale soon: water meter and motion sensor
- functionality for resetting the binding to HomeKit, which is available in the device settings
- operating modes for the socket. Help to restore the state after a power outage
version 2021.11.2
posted on 2021-12-14
In this app update:
- made graphs of temperature and humidity changes, statistics on sensors for the last 24 hours are available
- added emoji in addition to standard device icons
- added the ability to upload FaceID photos for residents of houses in which Rubetek intercoms are installed
- fixed problems with cameras: viewing saved records, full screen mode, incorrect behavior of additional sensors in cameras
version 2021.11.1
posted on 2021-11-16
- Changed the authorization method, now you can log into the application by an incoming call
- Fixed problem with missing images in events
version 2021.10.1
posted on 2021-11-16
- Added support for shortcuts, now you can go to the application tabs directly from the desktop
version 2021.9.1
posted on 2021-11-01
Added support for common building systems in apartment buildings connected to the IoT Rubetek platform.
Now in the application you can:
- receive calls from intercoms and open doors
- view video from CCTV cameras in the yard or in the parking lot
- receive readings from water, heat and electricity meters
version 2021.7.2
posted on 2021-09-27
The mechanism for adding devices has been redesigned.
Fixed inaccuracies in the description of the steps for adding devices.
version 2021.7.1
posted on 2021-07-14
Added Tion 4s device support for Rubetek control module
version 2021.5.1
posted on 2021-06-15
Fixed some bugs that bothered you
version 2021.6.1
posted on 2021-06-15
Improved application stability, fixed annoying bugs
version 2021.4.2
posted on 2021-05-14
Bug fixes and improvements
version 2021.2.1
posted on 2021-02-08
In this release, we've tweaked the live streaming and playback of camera recordings, and also got rid of a few annoying bugs. We continue to work on the functionality and stability of the application.
version 2020.12.5
posted on 2020-12-28
We've worked on a stable app and fixed screen scripting errors.
Happy New Year!
version 2020.12.3
posted on 2020-12-15
- Fixed a problem with the disappearance of the camera
- Fixed a bug when trying to set up SMS informing
- Fixed display of room temperature for convectors
version 2020.12.2
posted on 2020-12-13
Now you can choose any delayed start time in scripts.
Fixed playing of archive for cameras, as well as problems with saving statistics tariff. (We remind you that statistics are now in the lower curtain, on the main screen). Problems with running the application on older versions of Android have been resolved.
version 2020.12.1
posted on 2020-12-08
We are listening to your feedback and are working to improve it. What's new:
- Improved stability
- Added Favorites screen for devices, cameras and scenarios
- Fixed the problem of connecting to the broadcast of some camera models and optimized the speed of receiving the broadcast
- Added display of battery charge for RC-3602 and RS-3222 sensors
- Fixed issue with setting favorite colors on RGB lamp control screen
version 2020.11.1
posted on 2020-11-17
This release contains improvements for the stable operation of the application.
Fixed:
Creation and operation of scenarios with the RC-3602 TV sensor
Playback of RV-3403/05/07/12/14/15 cameras archive
Timer operation on the RE-3311/12 relay and RE-3301 socket
Software update for control center and Wi-Fi devices
Setting the time zone above Sakhalin (UTC +10)
What's new? Picture-in-picture mode is now available. You can watch video from the camera while working with other applications.
version 2020.10.3
posted on 2020-11-03
We've made several fixes and improvements based on your feedback. Write to us about your wishes and inaccuracies in the feedback section - together we will make the application better.
- Added display of IP and mac addresses in the camera settings
- Fixed a bug with duplicating videos in the video archive
- Fixed black screen when playing cameras
- Fixed problem with updating devices
- Fixed editing tariffs on the Statistics screen
- Breather control bug fixed
version 2020.10.2
posted on 2020-10-21
The catalog for adding now displays the entire available range of devices.
Fixed stability issues when viewing cameras.
version 2020.9.3
posted on 2020-10-08
Improved stability, bug fixes.
Returned the display of room temperature to the convector.
version 2020.9.2
posted on 2020-09-12
Thank you for choosing rubetek! In this version, minor bugs have been fixed and the application has improved. New in this version:
. Ability to save and share photo events
. Convenient one-handed control shutters
. In the device settings, when you click on the HomeKit password, a QR code is available to add
Found a bug or want to share suggestions for improvement? Email us at support@rubetek.com
version 2020.8.2
posted on 2020-08-18
Fixed problems with the network filter
version 2020.8.1
posted on 2020-08-18
Smart home management has become even more convenient:
- Increased the speed of the application
- The screens for adding devices have become more beautiful and clearer
- Fixed problems with scenarios with RF switch channels
- Fixed bug when changing the name and icon of the control unit channels
- Fixed display of the status of connection to the Control Center
version 2020.7.1
posted on 2020-07-08
We worked on optimizing our smart home and tried to realize your wishes:
- Updated design of the screens for adding a central control unit
- Fixed localization of notifications from the camera
- Fixed the inability to arm the house in the line interface
- Optimized camera list screen
- Display of sensor names and surge protector in scripts
- Fixed the inability to save the script by condition with a push notification
version 2020.6.1
posted on 2020-06-14
A little more updated. We fixed bugs, worked on usability and optimization of our smart home. Now loading screens and devices are faster and more stable.
version 2020.5.1
posted on 2020-06-09
In this release, we have worked on fixing bugs, including:
- Fixed bugs with adding and configuring cameras;
- Improved scripting in homes with the Control Center;
- Fixed setting timers for the network filter.
version 2020.4.2
posted on 2020-05-18
Fixed scripting issues. Fixed event history issues.
version 2020.4.1
posted on 2020-04-10
- Display the signal strength of the current Wi-Fi network for Wi-Fi devices
- Fixed known problems connecting cameras to the home network
- Improving the stability and quality of connection with devices
version 2020.3.3
posted on 2020-03-31
While the whole world is fighting the virus, we are fighting bugs. An account in our favor - some of them are no longer a hindrance to you.
- Fixed problems when registering to foreign phone numbers
- Optimized connection with Wi-Fi devices
- When the sensor battery is about to discharge, a notification will be displayed on the device tile
- For geeks: technical information about the MAC address of the device has been added to the Wi-Fi device settings
Take care
version 2020.3.2-21-gfb806ff6c
posted on 2020-03-17
Corrections and improvements in the operation of a two-button Wi-Fi switch
version 2020.3.1
posted on 2020-03-11
- For Wi-Fi devices, the option to save or not the device status after a power reset has been added.
- Added new lighting icons
- New screen for managing the network filter
- Fixed certain errors in the scripts
- Optimized connecting and adding cameras
version 2020.2.2
posted on 2020-02-26
- Minor design improvements
- Fixed problems in scenarios involving WiFi sockets and surge protector
- Fixed problems with entering the house through an invitation
- Optimized the process of adding devices and notifications
version 2020.1.1
posted on 2020-01-24
What's new:
- Added animation indicating where the reset button is on cameras
- The video stored on the phone in camera view mode is now conveniently displayed and opens in the gallery of your smartphone
What is fixed:
- On the Add Camera 3401 screen, an incorrect broadcast display was fixed
- Fixed problem with adding temperature and humidity sensor
- Fixed not displaying the temperature and humidity sensor in the line mode of the interface
version 2019.12.2
posted on 2019-12-25
The problems of recording video from the camera viewing screen and viewing cameras on Samsung phones have been resolved. Download this update and maybe take a picture of Santa Claus. All with the coming!
version 2019.12.1-16-g876a77fdd
posted on 2019-12-10
Now, along with arming the house, the available cameras will also be armed.
Fixed problem with playing archive of video recordings on cameras
version 3.55.0
posted on 2019-11-29
- Added indication of the status of each camera in the general list of cameras.
- Fixed bug updating Wi-Fi devices
- Fixed the lack of photos from cameras in the history of events
version 3.54.2
posted on 2019-11-21
. Fixed formatting the memory card in smart cameras
. Added convenient navigation on the screens. Now, to go to the previous screen, you can drag your finger from the left edge to the side of the right
. Added the ability to transfer Control Center between houses.
version 3.52.7
posted on 2019-10-25
In this version of the application, it became possible to configure the access points of the control center: network name and password, encryption type.
Regards, Development Team
version 3.52.6.1
posted on 2019-10-07
- Recording video to the cloud: now the RV-3409, RV-3406, RV-3408, RV-3411, RV-3413 cameras can record video to Google and Yandex cloud drives
- Added the ability to hide devices and sensors on the device screen
- Added ability to group cameras by room
version 3.52.5
posted on 2019-09-19
We present to you a new feature - device grouping.
Combine several identical devices into a group and manage them simultaneously!
Added support for the new Rubetek cameras: RV-3406, RV-3408, RV-3411, RV-3413
Respectfully,
Development team
version 3.52.3
posted on 2019-09-10
. Fixed a bug in the two-way audio communication on cameras
. Improved adding cameras